Scope Of Delivery - Goobay 44872 Manual De Instrucciones

EN User Manual
LED table and clamp magnifying lamps
1 Safety Instructions
• Read the user manual completely and carefully before use.
It is part of the product and contains important information for correct use.
• Keep this user manual.
It must be available for uncertainties and passing the product.
• Do not open the housing.
• Do NEVER let the product unattended in use.
• Compare the specifications of product, power supply and peripherals.
These must be identical.
• Not meant for children.
• Do not repair defective products by yourself, but contact the dealer or
producer.
• Do not modify or alter product nor accessories.
• Avoid stresses such as heat and cold, moisture and direct sunlight, mic-
rowaves, vibrations and mechanical pressure.
• Only use in dry ambience.
• Risk of injury by stumbling and falling
• Use the desk stand only on stabil, non-slipping and horizontal surfaces.
• Use the mounting clamp only on stabil plates with a thickness of 10-60 mm.
• Only use the power supply, included in delivery.
• Switch off the lamp before working on it and disconnect the mains plug.
Risk of breaking the locking lug
• Carefully assemble and disassemble.
Risk of injury and material damage by glass breakage
• Carefully remove the magnifying lens.
2 Description and Function
2.1 LED table and clamp magnifying lamp
This product is an energy-saving LED table and clamp magnifying lamp with exchan-
geable 4 inch lens, flexible gooseneck, desk stand and/or mounting clamp.
2.2 Operating elements and product parts
1
1
2
3
2
4
3
5
4
6 5
7
6
7
8
8
Fig. 5: Operating elements and parts
2.3

Scope of Delivery

Artile No. Package content
44872 LED agnifying lamp, power supply unit, table clamp, desk
stand, user manual
55980 LED agnifying lamp, power supply unit, table clamp,
user manual
3 Intended Use
We do not permit using the device in other ways like described in chapter
Description and Function. Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
4 Preparing
• Compare the specifications of product, power supply and
peripherals. These must be identical.
• Check surfaces and plates for being stabil.
5 Assembly/Disassembly
Risk of breaking the locking lug
• Carefully assemble and disassemble.
5.1 with desk stand (44872)
6
7
Fig. 6: with desk stand
1. Insert the locking lug (6) into the table stand (7).
2. Turn the table stand (7) until it clicks into place.
REV2019-11-07
V3.0
ON/OFF switch
mounting ring
magnifying lens
gooseneck
power supply and DC connection
locking lug
desk stand
mounting clamp
5.2 with mounting clamp (44872, 55980)
6
Fig. 7: with mounting clamp
1. Insert the locking lug (6) into the mounting clamp (8).
2. Turn the fastening clip (8) until it clicks into place.
6 Connecting
Risk of injury by stumbling and falling
1. Ensure safe cable laying.
2. Connect the delivered power supply to a well accessible mains socket
and to the DC-connector (5).
7 Operating
1. Before each use, make sure for secure attachment of the lamp.
2. Set the lamp always in a way, that one hand fixes the table stand or the
mounting clamp and the other hand the sets the lamp at the top.
3. Switch the lamp on or off by the ON/OFF switch (1).
8 Relampings
The lamps are permanently installed and can not be exchanged.
9 Removing the magnifying lens
Risk of injury and material damage by glass breakage
• Carefully remove the magnifying lens.
Fig. 8: Removing the magnifying lens
The magnifying lens is exchangeable and can be removed after braekage or for
transporting.
1. Set the lamp horizontally.
2. Turn the mounting ring (2) with both hands anti-clockwise on the corruga-
tions for loosing.
3. Assemble or disassemble the magnifying lens (3).
4. Turn the mounting ring (2) with both hands clockwise on the corruga tions
for tightening.
10 Specifications
Article number
Environment
conditions
Connections
Dimensions
Weight
Magnifying lens
LEDs
Luminous flux
Power
Color temperature
Color rendering index
Beam angle
- 3 -
44872, 55980
8
2
3
44872
-5~+40 °C, max. 95 % RH
Lamp
DC socket (2.1 x 5.5 mm)
Lamp: 555 x 123 x 50 mm,
Mounting clamp: 116 x 80 x 72 mm
Desk stand:
154 x 145 x 30 mm
Lamp: 307 g,
Mounting clamp: 92 g
Desk stand: 784 g
Ø100 mm
30 SMD LEDs
570 lm
6 W
6200 K
>80
>120°
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
55980
Goobay
®