Sleep Operation; Dimmer Control - Denver CRP-514 Instrucciones De Uso

To recall the radio preset
To recall a preset station, press MEM.SET/M+ (11) button to select the desired
preset number.

SLEEP OPERATION

When you listen to the radio, press the SNOOZE/SLEEP/DIMMER (10) button
to enter into the sleep mode. You can adjust the sleep timer from 90 minutes to
15 minutes by pressing repeatedly the SNOOZE/SLEEP/DIMMER button (10).
When sleep timer is selected, the unit will automatically turn off once time is up.

DIMMER CONTROL

In standby mode,press the SNOOZE/SLEEP/DIMMER (10) button allows you to
set the brightness of the LCD display to high, low and off 3 levels.
DAYLIGHT SAVING TIME (DST) MODE
For countries with daylight saving time (DST) (one hour of difference between
summer time and winter time), this clock radio offers you DST option to adjust
summer time.
In standby mode press and hold for 2 seconds the <</TUNE-/YEAR-MONTH-
DAY/DST button (2).
The clock advances by one hour. To exit DST mode, repeat the above operation.
PROJECTION UNIT
- Focus setting : Adjust the projection clock brightness/focus by turning the
brightness/focus adjustment wheel unit the projected time is clearly shown
on the ceiling or wall.
- Adjust projected direction.
- To flip projected image by 180°, press 180° flip button (5).
- Converted the projection time or temperature, press keep depress over 2
seconds to enter PROJECTION TIME 180° FLIP/TIME-TEMPERATURE
button (5).
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A
DARKENED ROOM.
MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.
SPECIFICATIONS
Frequency range : 87.5 – 108 MHz
Battery backup : 3V (CR2032 Flat Lithium battery x 1) not included
Power supply : AC230V 50Hz
Temperature range for Indoor : 0 to + 50°C or 32 to 122 °F
ENG-4