Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.11 End of programming
5. Connections
2 GND
3 GND
5 0 (4) - 20 mA
6. Technical data
Display:
5 digit 7 segment red
LED-Display,
8 mm [0.31 in.]
high characters
Range of input signals
0 - 10V DC
2 - 10V DC
0 - 20 mA DC
4 - 20 mA DC
Resolution:
14 Bit
Linearity:
< 0.1% ± 1 digit at an
ambient temperature of
20°C [68°F]
Zero adjustment:
automatic
Temperature drift:
<70ppm/K
Measuring rate:
0.5 - 2 Measurement/sec
Current measuring:
Voltage drop:
max. 2.0V at 20 mA
Current limitation: 50 mA
4
be passed through once
again. All parameters
can be checked.
Programming routine will
be exited and the new
pa ra me ters will be
stored. Af ter wards the
device is ready to use.
Voltage measurement:
Input resistance: >1 MΩ
Elimination of power line hum:
digital filter at 50 Hz
Supply voltage:
galvanically isolated
Current consumption:
max. 50 mA
Ambient temperature:
-10°C to 50°C
[14 to 122°F]
Storage temperature:
-25°C to 70°C
[-9 to 158°F]
Data retention:
via EEPROM 1 Million
memory cycles or 10 years
Weight:
ca. 50 g [1.76 oz.]
Front panel rating: IP 65
EMC:
EN 61000-4-2/EN 55011 Class B
EN 61000-6-2
Cleaning:
The front of the unit is only to be cleaned
with a soft cloth moistened with water.
Error messages:
Err 0*
Error/defect in A/D-part
Err 3*
Error/defect EEPROM
Err 4**
Analog input overflow
Err 5*
Error/defect EEPROM.
Device not calibrated
* Please send the device back for checking
** Please check input signal and programming
7. Contents:
- Digital display with analog inputs
- Panel mounting clip
- Bezel for screw mount, panel cut-out
50x25 mm [1.97 x 0.98 in.]
- Bezel for clip mount, panel cut-out
50x25 mm [1.97 x 0.98 in.]
- Sealing
- Tack dry symbols
MN05401008E
Tabla de contenido
