3. Remove bucket.
4. Attach a garden hose to the drain hose
connector on the inside of the dehumidifier.
Securely attach the hose to be sure there is
no water leak.
NOTE:
■
The garden hose sold separately.
■
The connection is designed for North American
garden hoses only.
A. Garden hose
B. Drain hose connector
IMPORTANT:
In North America the garden hose connectors are
3/4" diameter straight (non-tapered) thread with a
pitch of 11.5 threads per inch (male part has an
outer diameter of 1 1/16 inches (26.99mm).
Take care not to injure hands
while connecting the hose.
When your dehumidifier is operating normally, you may hear sounds such as:
■ Compressor sounds, which may be loud.
■ Air movement from the fan.
■ Clicking sounds when the dehumidifier or compressor turns on and off, and when the Automatic
shut-off Switch is working.
A
B
10
5. Place the other end of garden hose into a
floor drain. Check to see that the hose lies
flat and is in the drain. Make sure the
draining end of the hose is on a lower level
than the hose connection to the
dehumidifier. The hose should not be
kinked or pinched.
6. Reinstall bucket.
NOTE:
■
To use the bucket without the garden
hose, simply remove the garden hose,
then reinstall bucket.
■
The bucket must be installed and
properly aligned for the dehumidifier to
operate with or without a garden hose
connected.