Multicontrol - AERMEC KSAE Manual De Instrucciones

KSAE fresh air probe
EN
WARNING: The KSAE probe is an accessory to be connected to the elec-
tronic board, therefore all precautions for the electronic boards must be
implemented.
Shielded cables should be used. The cables that carry temperature and
humidity signals should not be housed close to 220/380 V power cables
or near the wiring for the remote control switches:
in this way the risk of measurement errors caused by electromagnetic
interference can be avoided.
DESCRIPTION:
The KSAE kit is a probe designed for wall installation. It is comprised of a
plastic casing with screw cover.
THE KIT COMPRISES THE FOLLOWING COMPONENTS:
• n°1 - NTC probe
• n°1 - junction box
• n°1 - installation manual
CABLE TYPE:
• Bipolar double sheath, AWG22 with electrical resistance ≤ 73.9 Ω / km.
MAX CABLE LENGTH:
• Length 10m max connection.
POSITIONING:
In order for the accessory to perform correctly, it is essential that the ambient
air temperature probe is installed in an upright position on a fl at walls with
the cable gland facing downwards.
ASSEMBLY POSITION:
Preferably on the walls of control rooms.
Not above windows, chimneys, fl ues or near niches, balconies or gutters.
Never facing south or exposed to direct sunlight, but north-northwest and
where good air circulation is guaranteed (e.g. near corners).
Minimum assembly height: 2.5 m from the ground.
Do not paint the probe.
NORTH
The unit includes assembly instructions.
NOTES REGARDING THE CE DECLARATION OF CONFORMITY:
The accessory described in this manual can only be used when
coupled with the machines for which it has been designed. On
satisfying this condition, the CE Declaration of Conformity of the
appliance onto which it is integrated is valid. To control the list of
the compatible accessories, refer to the manual supplied with
the unit.
WARNING:
The accessory can be combined with KSAE MULTICONTROL sy-
stem, for installation of this system refer to the specifi c accessory

MULTICONTROL;

4 KSAE_4804290_03