Introduction; Remote Connection; Module Structure - IKOS 4HEAT Instrucciones De Instalación

INTRODUCTION

Remote connection

The smartphone is connected to the 4HEATmodule via data network provided by the
user's own telephone operator or via Wi-Fi network.
The smartphone triangulates with the cloud server to communicate the 4HEATmodule.
The dial-in times vary depending on traffic data network and the traffic to the server,
reaching in the worst case scenario a delay of 5 minutes. The remote connection mode
can be used if the user is registered to the cloud server.
The Wi-Fi Kit module, through the 4HEAT application, allows you to remotely monitor and
manage IKOS pellet products with a smartphone, as long as you have an internet connection.
The main functions of the application are:
• Turning the stove on and off;
• Checking the state of the stove in real time;
• Adjustment of power;
• Program the chronothermostat;
• Read the actual temperature detected by the stove;
• Graphical analysis.

Module structure

The Kit Wi.Fi module is composed of three main elements:
• Kit Wi-FI module: device that connects the electronic stove card with the local wireless
router;
• Data server: web infrastructure that allows data to archive and acts as the main remote
communication point;
• 4HEAT application: mobile application which allows the user to interact with the stove.
Kit contents:
Wi-Fi module 2 Screws Interconection cable
EN // 27
INSTALLATION INSTRUCTIONS
EN
Charger