Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. The battery pack should be recharged when it fails to
produce sufficient power on jobs which were easily
done previously. DO NOT CONTINUE to use under these
conditions. Follow the charging procedure. You may
also charge a partially used pack whenever you desire
with no adverse effect on the battery pack.
5. Foreign materials of a conductive nature such as, but
not limited to, grinding dust, metal chips, steel wool,
aluminum foil, or any buildup of metallic particles
should be kept away from charger cavities. Always
unplug the charger from the power supply when there
is no battery pack in the cavity. Unplug the charger
before attempting to clean.
6. Do not freeze or immerse the charger in water or any
other liquid.
Storage Recommendations
1. The best storage place is one that is cool and dry, away
from direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool dry place out of the
charger for optimal results.
nOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
THIS PRODUCT USES THE BATTERY
AND CHARGER LISTED IN THE CHART
BELOW.
Description
18V lithium-ion Battery
18V lithium-ion
Charger
COMPONENTS (FIG. A)
WARNING: Never modify the power tool or any part
of it. Damage or personal injury could result.
Refer to Figure A at the beginning of this manual for a
complete list of components.
INTENDED USE
The drill/driver is designed for professional drilling,
percussion drilling and screwdriving applications.
DO nOT use under wet conditions or in presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Installing and Removing the Battery Pack
From the Tool (Fig. A, B, C)
CAUTION: Make certain the lock-off button is
engaged to prevent switch actuation before
removing or installing battery.
Catalog Number
ʵ BTC480L
ʵ BTC490L
ʵ BTC492L
ʵ BTC499L
To install battery pack: Insert battery pack
until an audible click is heard as shown in Figure B.
To remove battery pack: Depress the battery release
button
8
as shown in Figure C and pull battery pack out
of tool.
Fig. B
Fig. C
Trigger Switch & Forward/Reverse Button
(Fig. D)
•
The drill is turned ON and OFF by pulling and releasing
the trigger switch
shown in Figure D. The farther the
1
trigger is depressed, the higher the speed of the drill.
•
A forward/reverse control button
rotational direction of the tool and also serves as a lock
off button.
•
To select forward rotation, release the trigger switch and
depress the forward/reverse control button on the right
side of the tool.
•
To select reverse, depress the forward/reverse control
button on the left side of the tool.
•
The center position of the control button locks the tool
in the off position. When changing the position of the
control button, be sure the trigger is released.
Fig. D
1
English
7
firmly into tool
determines the
2
2
7
Tabla de contenido
Solución de problemas
