Warranty Statement; Technical Specification - Elcometer 2350 Guia Del Usuario

5 SPARES & ACCESSORIES (continued)
5.4 ELCOMETER 2410 VISCOSITY CUP STANDARD
CALIBRATION OILS
In order to check the viscosity cup's calibration
or to certify it for ISO purposes, it is imperative
that viscosity cup standard calibration oils are
used.
Supplied in ½ litre (1 pint) bottles complete with
calibration certificate, standard oils have a
specific drain time, dependent upon the
viscosity cup type (Ford, DIN, ISO etc.) and the
orifice size or cup number used.
Specific calibration oils can only be used with specific flow cups - refer
to the table below to determine which calibration oil is required for
each cup.
Viscosity Oil
Part Number
K0002410M021
K0002410M022
K0002410M023
K0002410M024
Material Safety Data Sheets for the Elcometer 2410 Viscosity Cup Standard Calibration Oils
can be downloaded via our website:
http://www.elcometer.com/images/stories/MSDS/elcometer_2410m021.pdf
http://www.elcometer.com/images/stories/MSDS/elcometer_2410m022_m023.pdf
http://www.elcometer.com/images/stories/MSDS/elcometer_2410m024_m025_m026.pdf

6 WARRANTY STATEMENT

Elcometer Viscosity Flow Cups are supplied with a one year warranty
against manufacturing defects, excluding contamination and wear.

7 TECHNICAL SPECIFICATION

Body Material
Orifice Material
Accuracy
e
Nominal values.
www.elcometer.com
Flow Cup Type / Number
DIN ASTM / FORD
- 2
4 3
4 4
4 -
Elcometer 2350:
Elcometer 2351:
Elcometer 2353:
Elcometer 2354:
Viscosity at
ISO
25°C (77°F)
3
4
6
6
Anodised Aluminium
Stainless Steel
R
Kinematic
e
34cSt
120cSt
230cSt
460cSt
3%
10%
3%
2.5%
en-6