Ace 6157 Manual De Usario página 5

WARNING: Disconnect chime unit from power source before
opening code access door. Close door and replace screw before
reconnecting to power.
Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong
(two note), or Westminster (eight note) (Available on selected chimes). The
factory setting is for the Ding-Dong tune (or Westminster, when available). This
tune can be changed by following the instructions below.
• Ding (one note tune)
Inside Chime Extender: Add a jumper to location 8.
• Ding-Dong (two note tune)
Inside Chime Extender: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
Inside Chime Extender: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recom-
mend the back door use the Ding tune and the front door use the Ding-Dong
tune (or Westminster tune, available on selected chimes). You may purchase
any ACE wireless push button for a second entrance.
®
Remove
screw to open
access door
598-1070-04
Tune Settings
Tune Setting (Not used
on all models)
Back of Chime
Note: Some models might require the use of tweezers
to remove and replace the jumpers.
Figure 7
-5-
Tune Setting
Inside
Chime
Extender