Carefully unpack your slow cooker and clean it according to the instructions
found in the "CLEANING AND CARE" section.
Note: It is necessary to operate the slow cooker one time before placing
food in the stoneware liner.
1.
Pour 4 cups of water into the
stoneware liner and place it into
the main base. Cover with the
glass lid.
2.
Turn the temperature knob to the
"High" position, and allow heating
for approximately 30 minutes. You
may notice a slight odor; this is
normal and will quickly disappear.
1.
Prepare your ingredients to be
slow cooked directly in the
stoneware liner.
2.
Do not fill the liner to the top
with food.
3.
Put the glass lid on the stoneware
liner.
4.
Always make sure the
temperature knob is in "OFF"
position before plugging in the
unit.
5.
Insert the plug into a grounded
power socket of 120V, UL type.
6.
Select the desired temperature
setting (LOW or HIGH) and let
the ingredients cook slowly (see
section: TEMPERATURE KNOB).
7.
When cooking is complete, turn
the temperature knob to the OFF
position and unplug the unit from
the power outlet.
BEFORE FIRST USE
HOW TO USE
3.
Turn temperature knob to
"OFF" and allow cooling for 20
minutes.
4.
Wearing oven mitts, grasp the
stoneware liner by its handles
to carefully lift it and remove
it from the main base. Pour
out the water from the
stoneware liner.
5.
Rinse the stoneware liner, dry
thoroughly and place it back
into the main base.
8.
Using oven mitts carefully lift the
glass lid, using its knob to allow
steam to escape. MAKE SURE TO
KEEP HANDS AND FACE AWAY
FROM THE HOT STEAM, TO
PREVENT INJURY.
9.
You can either serve the
ingredients in the stoneware liner
or in another container. When
taking the stoneware liner out of
the aluminum pan, always use
oven mitts to grasp the handles,
particularly if you are sensitive to
heat. ALWAYS GRASP THE LINER
BY ITS HANDLES.
10. Always turn the appliance OFF
and unplug it from the electrical
outlet and allow it to cool down
before cleaning and/or storing it.
Note: Even when turned off and
unplugged, the Slow Cooker will
remain hot for some time after
using.