Corrective Action - Ty Pennington STYLE 146.46371610 Guía De Uso Y Cuidado

Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame.
Heater does NOT reach the desired temperature.
Heater glow is excessively uneven.
Heater makes popping noises.
Note: In a salt-air environment (such as near an ocean) corrosion occurs
more quickly than normal. Frequently check for corroded areas and repair
them promptly.
Storage
Between uses or during periods of extended inactivity:
a. Turn control knob to "OFF".
b. Disconnect LP cylinder and move to a secure, well-location outdoors.
c. Store heater upright in an area sheltered from direct contact with
inclement weather
(such as rain, sleet, hail, snow, dust and debris).
Note: Never leave LP gas tank exposed to direct sunlight or excessive heat.
d. If desired, use cover to protect the heater and help prevent buildup in air
passages.
CAUTION: Wait until heater is cool before covering.
TROUBLESHOOTING
Problem
Burner won't light
Burner flame is
low
Carbon build-up
Thick black smoke
If problems cannot be corrected by using these methods, pleas contact 1-888-287-0735.
Possible Cause
1. Gas pressure is low.
2. The orifice is blocked.
3. Control knob is not in "PUSH"
position.
1. Gas pressure is low.
2. The control knob is not
positioned at "High".
3. The burner jet may be partially
blocked.
4. Outdoor temperature is less
than 40°F and tank is less than
1/4 full.
5. Supply hose is bent or kinked.
Build-up of carbon can accumulate
over time.
Blockage in burner

Corrective Action

1. Turn tank valve "OFF" and
replace the tank
2. Clear blockage.
3. Turn control knob to "PUSH"
position.
1. Turn the gas cylinder valve "OFF"
and replace the cylinder.
2. Position the control knob at "High"
3. Clear blockage.
4. Use a full tank.
5. Straighten the hose.
Wipe off before lighting.
Wipe off before lighting.
24