Technical Data; Ec Declaration Of Conformity; Paper Shredder Securio P40 - securio P40 Instrucciones De Servicio

9 Technical data

Cutting type
Cut size (mm)
Security level DIN 32757 - 1
Cutting capacity** (sheets), A4
Weight
Cutting speed
Intake width
Power supply
Power consumption with max. number of
sheets
Operating mode
Dimensions W x D x H (mm)
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Volume of the shredded paper container
Sound pressure level emissions
(Idle running/ load)
Cutting size of the separate CD cutting
unit (optional)
* HSM-specifi cation
** The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.
*** Identifi ed by the letter after the 7-digit order number on the name plate on the back of the machine.
e.g. 1873111C >> cutting size 3.9 x 40 mm

EC Declaration of Conformity

The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder Securio P40
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2006
• EN 61000-3-2:2006
• EN 61000-3-3:1995 + A1:2001 + A2:2005
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 60950-1:2006 +A11:2009
• EN 62233:2008
Frickingen, 01.03.2010
Rolf Gasteier - Technical Director
18
All manuals and user guides at all-guides.com
Strip cut
5.8 3.9
2
70 g/m 58 - 60 45 - 47
2
80 g/m 51 - 53 40 - 42
2
67 kg
100 mm/s
Order number +C, E ***
3.9 x 40 mm
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-4-4:2004
• EN 61000-4-5:2006
• EN 61000-4-6:2007 + Corr. August:2007
• EN 61000-4-11:2004
SECURIO P 40
english
4.5 x 30 1.9 x 15
2 3 4
35 - 37 22 - 24
31 - 33 18 - 20
330 mm
230 V, 50 Hz
2.100 W
Continuous operation
580 x 550 x 936
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
145 l
60 - 62 dB(A) / 65 - 69 dB(A)
Order number +M, N ***
Cross cut
0.78 x 11 1 x 5
5 Level 6*
13 - 14 10
11 - 12 8
72 kg
110 mm/s
2.2 x 2.0 mm
05/2012