Idiomas disponibles
Idiomas disponibles
EASY-AV DROP BOXES
Follow the steps below and refer to Figures 3-2 and 3-3 to install the Easy-AV Drop
Boxes. The numbers 2–5 in Figure 3-3 correspond to the numbered steps below.
1. Using a standard hole saw, cut a 3
3-2.
Hole in table:
3
1
⁄
" diameter
2
through
2. Attach the bottom mounting plate to the bottom of the table, positioned
parallel to the table edge.
3. Drop the Easy-AV Drop Box assembly into the table hole. See Figure 3-3.
4. Install (2) long clamping screws through the mounting plate into the cover
rim. Tighten the long nuts to the mounting plate.
5. Wire tie the line cord and other wires as necessary.
0.75"
(1.91 cm)
minimum
2.00"
(5.08 cm)
2.97"
(7.54 cm)
2
Figure 3-3. Installing the Easy-AV Drop Box.
8
1
⁄
" diameter hole in the table. See Figure
2
Figure 3-2. Hole in table.
3
4
2.50" (6.35 cm)
maximum table
thickness
5
