Diagnostics; Diagnostic - Vehicle Selection - Magneti Marelli LOGIC Guida Rapida

5. Read the Serial Port Number (COM ) associated at LOGIC
6. Start Logic Software
7. Click on the Setting icon
8. Select Autodiagnosis setting connection
9. Select «USB com port»
10. Select COM port Number from step 5 and confirm
11. Click on the «Home» icon to return to main page
12. When the software indicates that it needs to be restarted, restart the software

Diagnostic - Vehicle selection

 Make sure all connections (across vehicle, diagnosis module and PC) are safely
secured.
 Check that the diagnosis module is powered.
Select vehicle self-diagnosis in the home page
Select in the following sequence standard vehicle type, make, year, model and engine.
Select vehicle type-search control unit, make, etc. to find a compatible control unit.
Select engine make-code to search the vehicle using the engine code.
After this selection the software automatically shows all the resources available for the
vehicle selected
Diagnosis – Control unit selection
After the vehicle selection the tester will show all control units that can be diagnosed. If the
control units are not listed it is possible to use the "control unit search function" described
in the previous paragraph to check whether the diagnosis software designed for another
vehicle is compatible with the requested control unit.
D i a g n o s t i c
D i a g n o s t i c
s
s
.
11