Idiomas disponibles
Idiomas disponibles
STEP 10. Rotate adjustment hex counter clockwise
1/2 turn. A ratcheting sound will occur on backoff. This
is normal. Recheck all fasteners for proper installation.
Note: Final push rod stroke may not be reached until
trailer is put into service and the brakes are burnished.
L31195 US Rev 06/07 200M ART
STEP 7.
Insert the flat end of the
anchor stud through the
control arm bushing. Push
the threaded end into the
anchor plate slot and
loosely install flange nut.
STEP 8. After positioning
control arm and anchor pin
to desired location, tighten
the flange nut to 40-50 ft. lbs.
Note: S-ABA control arm position
is all the way toward the axle.
AA1 control arm position is such
that the installation indicator falls
within the control cover slot.
These common positions work
well for most applications.
Parts List
Torque Chart
Warning: Haldex strongly recommends routine visual checks be performed at EACH mainte-
nance service interval. Foundation brake operational checks utilizing CVSA level 1 applied
stroke criteria should always be utilized. Manual adjustment of automatic adjusters can dis-
guise hidden problems within the foundation brake. Brake components such as s-cams,
bushings, return springs, actuators, drums and adjuster installation MUST be within manu-
facturer's specifications. Adjuster control arms, wear bushings or attaching hardware that
demonstrate visual damage, or which fail the operational checks, MUST be replaced imme-
diately. Automatic Adjusters should NEVER be operated as manual adjusters except as may
be necessary to get the vehicle off the road for service.
Haldex Brake Products Corporation
2 . . . .3/8" x 1-¼" Long Bolt (Meritor)
1 . . . .5/16" x 1" Long Bolt (Fruehauf)
1 . . . .3/8" x 1-¼" Long Bolt (Fruehauf)
2 . . . .1/4" x 1-¼" Long Bolt (Dana)
2 . . . .1/4" Flat Washer (Dana)
1 . . . .1/4" x 1-¼" Long Bolt (Eaton)
3/8" - 16 . . . . .20-25 ft. lbs.
5/16" - 18 . . . . .10-15 ft. lbs.
1/4" - 20 . . . . . .5-7 ft. lbs.
Haldex Commercial Vehicle Systems
North American Sales Division
10707 N.W. Airworld Drive
Kansas City, MO 64153-1215
Phone: (816) 891-2470
Fax: (816) 801-4198
STEP 9.
Adjust
brakes by
rotating the
7/16"
adjustment
hex clock-
wise until
the lining
just
contacts
the drum.
North American Sales Division
Haldex Limited
525 Southgate Drive, Unit 1
Guelph, Ontario CANADA N1G 3W6
Phone: (519) 826-7723
Fax: (519) 826-9497
