Product Functions - Panacom HP-9590 Manual Del Usuario

All manuals and user guides at all-guides.com

PRODUCT FUNCTIONS

Wireless Headphone
1. Insert the emitter audio cable into the "Audio OUT" socket of the audio
source (see Fig.1) or earphone socket, and turn ON the function switch of
the emitter.
2. Turn on the volume control and power button ON/OFF on receiver, the
indicator will light up. First press the RESET key, and then press the SCAN
key, the sound sent from the emitter will be heard.
Note: If the sound is distorted or too strong, adjust the volume of the sound source
to a lower level, and the reception performance may improve.
Internet audio chat
There are two options for usage:
1. Wired: Connect the black end of the microphone cable into the audio
socket on the receiver, and insert the other two ends into the microphone
and audio sockets of the PC.
2. Wireless: Connect the black end of the microphone cable into the audio
socket on the emitter, and insert the other two ends into the microphone and
audio sockets of the PC. Aim the microphone, on the cable plugged into the
emitter, towards you and move the power switch of the emitter to ON posi-
tion, and the power indicator will go on.
Turn on the volume control and power button (ON-OFF) of the receiver and
the power indicator will go on. First press the RESET key and then press the
SCAN key, and then the sound sent out from the emitter can be heard.
Listening to the radio
The receiver can be used separatedly as an FM radio. Press SCAN key once,
and the receiver will automatically search toward a higher range and lock
one radio channel. When the highest range is reached, press RESET key
to return the frecuency to the lowest range. Press SCAN key again, and the
Pg. 4