Dip Switch Programming; 60Hz Ac Filter; Anti-Mask Operation; Blocking (Via Mw) - Pyronix XD10TTAM Manual Del Usuario

4. Dip Switch Programming

1. 50/60Hz AC Filter

ON = 50Hz. OFF = 60Hz (For use with AC supplies at 60Hz)

2. Anti-Mask Operation

ON = Anti-Mask 24hr
OFF = Anti-Mask enabled
only when disarmed

3. Blocking (via MW)

ON = Blocking Off
OFF =Blocking enabled only
when disarmed

5. Sensitivity

ON = Auto Sensitivity

6. Open Mask and Alarm Relays

ON = Mask & alarm relays open

7. Buzzer Alarm

ON = Buzzer Enabled

8. LED Enable/Disable

ON = LED Enabled (Remote LED disabled)
OFF = LED Disabled (Remote LED enabled)
To remotely enable the LEDs:
Connect LED to walk test PGM: 0V = Walk Test On. 12V = Walk Test Off

4. RI 1 mode

RI 1 mode is used with Switch 2 and 3
Connect RI1 to arm/disarm PGM:
0V = Disarmed. 12V = Armed
Switch 2: Anti Mask Operation
OFF = Anti-Mask enabled only when disarmed
Switch 3: Blocking (via MW)
OFF = Blocking enabled only when disarmed
OFF = High Sensitivity
OFF = Mask relay open
OFF = Buzzer Disabled
Page: 5
XD10TTAM