Safety And General Information; Product Description - Omega 28045 Instrucciones De Operación Y Lista De Piezas

SAFETY and GENERAL INFORMATION

Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack
before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating
procedures before attempting to use. The owner and operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's
native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of this jack,
remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears
damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or
suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until jack has been checked by a factory authorized service center (contact distributor or manufacturer
for list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel.
Labels and Operator's Manuals are available from manufacturer.

PRODUCT DESCRIPTION

Hydraulic Forklift Jack is designed to lift, not support, one side of a rated capacity forklift. Immediately after lifting,
forklift must be supported by a pair of appropriately rated forklift stands. Air option unit requires at least 7.8 CFM @
110 - 175 PSI.
WARNING: Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted
!
forklift with a pair of appropriately rated forklift stands.
SPECIFICATIONS
Model Capacity
28045
4 Ton
28047
*Air Hose
*Lift Control Valve
Handle
(*) available on air option model 28047 only
Jack Size (L x W)
29-3/4" x 10"
Hydraulic Unit
*Air Motor
Figure 1 - Typical Forklift Jack Nomenclature (28047 shown)
Min. Height Max. Height
2-1/8"
Oil Filler Plug
Handle Sleeve
2
Hydraulic Lift
17-1/8" 15"
Lifting Arm
Saddle
Front Wheel