Jung FMAS26UP Instrucciones De Servicio página 10

Actuador pulsador/de conmutación eNet 2 fases mini
Activate wind alarm switching
state
Deactivate wind alarm swit-
ching state
Priority, sun protection
Activate sun protection swit-
ching state
Deactivate sun protection swit-
ching state
Priority, twilight
Activate twilight switching sta-
te
Deactivate twilight switching
state
Switch off brightness overs-
hoot
Switch on brightness unders-
hoot
82579133
J0082579133
On, Off
Basic setting: Off
On, Off
Basic setting: Off
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
On, Off
Basic setting: On
On, Off
Basic setting: Off
10/11
Defines the behaviour of the
output on activating the wind
alarm.
Defines the behaviour of the
output on deactivating the
wind alarm. Only visible when
the priority for the wind alarm
is 0.
Specifies the priority for reca-
lling and removing a scene of
type Sun protection for the
channel.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Specifies the priority for reca-
lling and removing a scene of
type Twilight for the channel.
Defines the behaviour of the
output on activating the twilig-
ht function.
Defines the behaviour of the
output on deactivating the twi-
light function. Only visible
when the priority for the twilig-
ht function is 0.
Allows automatic switch-off
according to the brightness. If
the parameter is On, then the
light controller switches off au-
tomatically when the bright-
ness setpoint is greatly excee-
ded. This parameter is not yet
active, as a light controller has
not yet been implemented.
Allows automatic switch-on
according to the brightness. If
the parameter is On, then the
light controller switches on au-
tomatically when the bright-
ness setpoint is greatly un-
dershot. We recommend only
using the parameter in con-
nection with the parameter
"Switch-off on brightness
overshoot". This parameter is
not yet active, as a light con-
troller has not yet been imple-
mented.
24.03.2017