Integra 5 Zone Montaje Y Modo De Empleo página 30

GB I
These errors appear on the hob display.
Error code
C, E, C flashing, E flashing
or symbol -
E2
E3
E4, E5, E6, E7, E8, E9, EA,
EC, EH,
No display / Function
u
Er31, Er47, Er22, Er20,
Er36, Er40, U400
or display segments that
light up in sequence
Er 03 o
The power returns to
level 0
L
CLEANING AND MAINTENANCE FUNZIONAMENTO
HOB ERROR TABLE
Description
If the display of a cook-
ing zone shows one of
these symbols, you have
intervened or you are
intervening in the basic
system configurations.
Excessive temperature of
the cooking zone.
Malfunction due to the
use of pots made of an
unsuitable material.
Hardware fault
Voltage or touch control
error.
Pot not detected
Touch control fault
Continuous activation of
one of the buttons, the
control switches off after
10 seconds.
No error!
Child-Lock activated
Possible causes
Problems or changes to
the basic system config-
urations detected.
Pot overheating.
Pots of made of unsuita-
ble material or possible
loss of their magnetic
properties as the tem-
perature rises.
Hardware errors detect-
ed
Faulty electrical
nection or component
failure.
Pot not suitable
Error detected in the
touch control
Liquid or pot on the con-
trol area
Fault detected in a hard-
ware component
30 30
Solution
Contact technical sup-
port specifying the error
code.
Cool the system down
by reducing power or re-
moving the pot.*
Use pots of made of a
suitable material or re-
place them.*
Contact technical sup-
port specifying the error
code.
con- Contact technical sup-
port specifying the error
code.
Use a suitable pot.Refer
to the paragraph suita-
ble pots. *
Contact technical sup-
port specifying the error
code.
Dry and clean the glass
or remove the pot from
the control area.
Contact technical sup-
port specifying the error
code.
Deactivate the Child-
Lock by referring to the
appropriate paragraph.