UNICOM USR Courier 56K Manual Del Usuario página 8

Start and Control Panel. Make sure you are in Classic View, and double-click the
System icon. Click the Hardware tab. Click Device Manager and then double-
click the Modems tab. Right-click Courier V.Everything Ext PnP (V90-x2) and click
Update Driver . When the Hardware Update Wizard appears, select Install from
a list or specific location (Advanced) and click Next. Select Don't search. I will
choose the driver to install. Click Next. Click Have Disk. Type D:\ and click OK. If
your CD-ROM drive uses a different letter, type that letter in place of "D". Select
U.S. Robotics Courier V.Everything EXT PnP and click Next. A Hardware
Installation warning may appear. Click Continue Anyway if it does*. Click Finish
to complete the installation.
All Other Operating Systems
Beyond full support of the Windows Operating Systems described in this
manual, the Courier 56K Business Modem will function in any operating system
that supports an RS-232 COM port, such as DOS, Linux, or UNIX. Standard COM
port settings are: bits per second: 115,200; data bits: 8; parity: none; stop bits:
1; flow control: hardware. Assign your terminal application to utilize the COM
port to which you connect the modem's serial cable. Additional setup
information can be found in the 3453 FAQ section at http://www.usr.com/
support
*U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and has
verified compatibility with Windows XP and 2000.
Would you like to install the Instant Update software?
The Instant Update software automatically notifies you of any updates to your
modem's code.
To install the Instant Update software, keep the Installation CD-ROM in your CD-
ROM drive. Click Windows Start and then click Run. In the "Run" dialogue box,
type D:\setup.exe. If your CD-ROM drive uses a different letter, type that letter in
place of "D". Choose the Software option, select U.S. Robotics Instant Update,
and then follow the on-screen instructions to install the Instant Update software.
Would you like to install the Internet Call Notification software?
Internet Call Notification lets you take an incoming voice call without dropping
your Internet connection.
• To install the Internet Call Notification software, keep the Installation
CD-ROM in your CD-ROM drive. Click Windows Start and then click
Run. In the "Run" dialogue box, type D:\setup.exe. If your CD-ROM
drive uses a different letter, type that letter in place of "D".
• Choose the Software option, select U.S. Robotics Internet Call Notifi-
cation, and follow the on-screen instructions to install the Internet
Call Notification software.
† Internet Call Notification is supported in Windows 98, 2000, Me, and XP.
6
†