coltene/whaledent ParaPost Taper Lux Instrucciones De Uso página 6

ParaPost ® T L
APER
may be in the way to gain direct straight-line
access to the post.
4. Wear full face safety mask when removing post
from tooth. Indent the center of the post using a
# 1/2 round bur at high speed.
5. Carefully drill an initial channel into the center of
the ParaPost Taper Lux Post using a Kodex twist
drill (cat. # K95 or K97) at slow speed.
6. Carefully drill to full depth through the center of
the post using an end cutting Tenax Starter Drill
(cat # Te-DC-1, Ø.036"/0.90 mm) or Tenax Drill
(cat # Te-A-11, Ø.043"/1.1 mm). Check radi-
ographically at each stage.
7. Gradually work up to original diameter using
ParaPost Taper Lux Drills.
8. Re-treat endodontically, if necessary.
9. Restore with new post/core and restoration.
Always verify steps via radiograph.
* References and/or literature available upon
request.
**Sporox II is a registered trademark of Reckitt &
Coleman, Inc.
6
UX ™
Instructions for Use