NHT Xd Guía De Configuración página 2

NOTICE - IMPORTANT SAFETY INFORMATION
The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user of
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol adjacent to a terminal is intended to alert
the user that the terminal is hazardous live.
1. READ INSTRUCTIONS
All the safety and operating instructions of your NHT equipment should be read before power is
applied to the equipment.
2. RETAIN OWNER'S MANUAL
These safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the equipment and in the operating instructions are important and should be fol-
lowed.
4. FOLLOW INSTRUCTIONS
All operating and use instructions are important and should be followed.
5. HEAT
The equipment should be kept away from areas of high temperature, i.e., heater vents, radiators,
stoves/ovens, fireplaces, etc.
6. VENTILATION
The equipment should be used in an area suitable for proper ventilation. Care should be taken
not to impede airflow in and around the cabinet. Ensure that the amplifier always has a clear-
ance of at least 10cm / 3.94in from other objects on both sides, top and rear.
7. WATER AND MOISTURE
The equipment should not be used in or around water, such as a bathtub, sink, or swimming
area. Also, the equipment should not be used in areas prone to flooding, such as a basement.
The apparatus shall not be exposed dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
8. POWER SOURCES
The equipment should be connected only to a power source of the same voltage and frequency
as that listed on the rear panel above the power cord entry point. Always connect to a mains
socket with a protective earthing connection. The power cord plug is used as the supply
disconnect device. This plug shall remain readily accessible at all times.