Caberg MODUS Manual Del Usuario página 8

ENG
5. INSTRUCTION TO ASSEMBLE THE INNER LINING
5.1 Place the main liner padding inside the helmet.
5.2 Insert the plastic frame C in the front and fasten it to the seating
attached to the EPS (Pic. 8).
5.3 Attach the side frame starting from the front (Pic. 9) towards the
back (Pic. 10). Do the same operation for the other side.
5.4 Place the neck device by inserting its plastic strip between the
shell and EPS (Pic. 11).
5.4 Insert the chin guard strip into the eyelet on the cheek pad
(Pic.12). Hook the studs on the back.
6. WIND STOP
The wind stop device prevents the incoming of cold air from
below.
6.1 INSTRUCTION TO MOUNT THE WIND STOP
Insert and press centrally the stop wind plastic frame between
the shell base trim and chin guard. (Pic.13)
6.2 INSTRUCTION TO REMOVE THE WIND STOP
Remove the stop wind by pulling it out gently (Pic.14)
7