KTM Power Parts 90111942044 Manual Del Usuario página 5

1
3
4
4
A
7
6
9
12
Scope of supply:
1x socket (1)
1x connection cable(2)
1x mounting nut M18x1 (3)
2
- Remove the screws (4).
- Remove the expanding rivets (5) on the left and right.
5
- Fold the headlight mask forward.
5
Assembly
3,2mm
- Drill a ø18.5mm hole at position (A) and mount the socket (included).
- Cut out a small notch in addition to the hole (figure B).
B
- Connect the plug (6) of the connection cable (included) to the socket and
plug (7) to the ACC cable (8).
NOTE:
Models without the ACC cable require the optionally available ACC cable
90111942010. To mount, see Routing the ACC cable.
8
NOTE:
ACC1 - current via permanent positive.
ACC2 - current via ignition.
NOTE:
Plugs (9) can continue to be used as ACC1 or ACC2.
Route the ACC cable 90111942010 (optionally available)
10
11
- Remove the passenger seat (10) (see the Owner's Manual).
- Remove the seat (11) (see the Owner's Manual).
- Remove the tank hood (12).
60111042000
60111042060
62011042050
5