Sencor STS 30WH-NAA1 Manual De Usario página 8

STS 30WH-NAA1 / STS 31GR-NAA1 / STS 32BL-NAA1 / STS 33OR-NAA1 / STS 34RD-NAA1
STS 35VT-NAA1 / STS 36YL-NAA1 / STS 37GG-NAA1 / STS 38RS-NAA1 / STS 3XXX-NAA1
Note:
If the power cord is not plugged in, the control lever A2 will not be locked in the lower position
and the toaster cannot start the toasting process.
5) As soon as the toasting cycle is completed, the toaster will automatically raise the inserted bread,
bagel or toaster pastry. Take the toast out of the toasting slots A1. After removing the toast from
the toasting slots A1, you can toast another slice of bread, bagel or toaster pastry.
Note:
Toasting can be interrupted at any time by pressing the STOP button A6.
The control lever A2 with the "High Lift" function makes it easier to take out smaller bread
products. Lift the lever A2 about 1in (2.5cm) above the initial position and take out the bread.
6) Always unplug the toaster after use and allow it to cool completely before further handling.
Defrosting function
• Put a slice of frozen bread into each of the toasting slots A1 and set the desired browning level
using the browning control dial A5. Push the control lever A2 down until it is locked in the lower
position. Press the DEFROST button A3 to toast frozen bread. The DEFROST button A3 will be on.
The toaster will automatically eject the toast once the toasting process is completed.
Note:
Toasting can be interrupted at any time by pressing the STOP button A6.
Bagel function
• The bagel function adds extra time to the toasting cycle to toast bagels or thicker slices of bread.
Insert half a bagel or thicker slice of bread into each of toasting slots A1 and set the desired
browning level using the browning control dial A5. Push the control lever A2 down until it locks
in position. Press the BAGEL button A4. The button A4 will be on. The toaster will automatically
eject the bagel or toast once the toasting process is completed.
Note:
Toasting can be interrupted at any time by pressing the STOP button A6.
Toast reheat function
• This function lets you reheat the toast without toasting it more. Set the browning control dial A5
to the "REHEAT"
control lever A2 down until it is locked in the lower position. The toaster will automatically eject
the inserted toast once the toast reheating process is completed.
Note:
The toast reheating process can be interrupted at any time by pressing the STOP button A6.
Copyright © 2015, Fast ČR, a.s.
Toaster
position. Insert items to be toasted into the toasting slots A1 and push the
EN-8
06/2015