Schlage ND‑Serie Instrucciones De Instalación página 3

2
Install chassis/outside lever assembly
Latch prongs fi t between slide and slide clip.
Slide clip
Slide
3
Keyed IC Outside Levers ONLY:
Install outside lever and spring cage. Follow instructions in ND‑Series
Timing Guide.
Non-Keyed Outside Levers ONLY:
Install outside lever and spring cage, then continue to step 4.
Optional spacer
1³⁄₈" (35 mm) thick
door ONLY
Latch
prongs
IMPORTANT!
Push latch to
center of slide
IMPORTANT
DO NOT install
IC cylinder!
Follow steps in
ND-SeriesTiming
Guide!
4
Install anti‑rotation plate
Align the tab with the indent on the hub.
Indent
Indent
Optional spacer
1³⁄₈" (35 mm) door ONLY
5
Install inside spring cage assembly
Door
edge
6
Install inside rose
Align dimple
and groove.
Tab
Anti‑rotation
plate
Lever catch
faces door edge.
Rotate rose until
it stops.