Sleep Mode - Artec T3A Manual Del Usuario

Advanced Operation
DCC View
1. Select DCC View from the OPTION and press OK.
2. Use the buttons to select the desired DCC View.

Sleep Mode

1. Select Sleep Mode from the OPTION and press OK.
2. Use the buttons to select the desired time or Off
sleep timer.
Note:
If remote control has been inactive for more than 4 hours,
the Converter Box will automatically go into sleep mode.
Press POWER button, it will to restart active power on
the Converter Box.
Picture
1. Select Picture from the OPTION and
press OK.
2. Use the buttons to select your
desired setting items, press OK.
3. Use the buttons to adjust the
number.
4. To reset the setting to the picture default,
please select Picture Default and press
OK.
Accessory
1. Select Accessory from the OPTION
and press OK.
2. Displays the current system software
version information.
3. To reset the setting to the factory default,
please press OK button, select Yes then
press OK.
Note:
If you want to return to factory default settings when the Lock System is set on the
"On" mode, then you have to input the previous Lock Password number.
12