Tabla de contenido
USING YOUR SCANNER
Setting Up Your Scanner
1. Connect the Power Adapter
Make sure the 4-way switch is set to OFF. Locate the Power Adapter port on
the back of the scanner. Connect the Power Adapter to the scanner first
before connecting the Power Adapter to the electrical wall socket.
Optional -- Insert 3 AAA Alkaline Batteries (Not Included)
Turn the scanner upside down. Take the battery cover off the scanner. Insert
the batteries aligning them with the + and – symbols. Replace the battery
cover. When batteries are used, the scanner will operate without the Power
Adapter. The batteries do not need to be removed, if you are using the Power
Adapter.
Optional -- Insert Your SD Memory Card (Not Included)
To scan your pictures to an SD Memory Card, insert your SD card label-side
up into the SD slot located on the right side of the camera. Push the SD card
into the scanner until you hear or feel a click. The scanner is compatible with
SD cards with a capacity up to 32GB. If an SD card is not inserted, the
scanner will record to its internal memory (about
10
pictures).
10
Tabla de contenido
