Factory Reset - ION PRO SESSION DRUMS Manual Del Usuario

5. To adjust the Pattern's tempo, press TEMPO to enter Tempo Adjustment Mode. The LCD will display
the current tempo value for that Pattern (30–280 BPM or "beats per minute"). Use VALUE +/- to adjust
the tempo of that Pattern. Press + and – simultaneously to return to the Pattern's default tempo.
6. When you are finished, press PATTERN to re-enter Pattern Select Mode or press another button.
RECORDING
In addition to playing back Preset Patterns, you can
record your performance to the User Pattern slot (#41).
To record the User Pattern:
1. Press and hold SAVE / REC for more than two
seconds to enter Record Ready Mode. The REC
LED will begin to blink to let you know that you are
ready to record.
2. Before you begin recording you can:
• Pick a Pattern to play along with – press
PATTERN, then use VALUE buttons to select
the pattern.
accompanying Pattern (see DRUM OFF) or
turn the metronome on or off.
• Select the drum Kit you want to use – press
the KIT button, then use VALUE buttons to
select a drum kit.
• Adjust the tempo – if you are playing along
with background music, you may want to adjust
the tempo of the music. Press TEMPO, then
use the VALUE buttons to adjust the tempo.
3. When you are ready to begin recording, press
START. The REC LED will stop blinking and you
will hear the metronome "count-down" from "4" before it
begins recording. You can now start playing.
4. When you are finished, press the STOP button to stop the
recording.
5. You can now listen to your recording by selecting Pattern 41
and pressing START.
Note: Recording will erase any previously recorded User Pattern you had. You will not be able to adjust any
of the module's parameters while recording.
Note: If the recording reaches full capacity – approximately 5,000 notes – the LCD will read "FUL".
DRUM OFF
You can press DRUM OFF to mute the drum sounds of the
accompanying Pattern. (This can be a useful practice tool
when playing along with Patterns.) The Drum Off Indicator
will light up, and you will still be able to play all pads,
cymbals, and pedals in this mode. To unmute the drum
parts, simply press DRUM OFF again and the Drum Off
Indicator will be unlit.

FACTORY RESET

To return the module to its original settings, hold down
VALUE + and VALUE – simultaneously while turning on the
module. This will restore its factory settings, erasing any
recorded data or changed settings, including User Kits, the
User Pattern, and any volume, metronome, or Sound
settings, which will return to their defaults.
You can also mute the
To turn the metronome on or off
before or during the recording, press
CLICK.
sound will not be recorded.
5
Either way, the metronome