Motor-Zoom Control (Auto-Zoom) - Metz Canon SCA 3102 M3 Manual Del Usuario

4. Motor-zoom control (auto-zoom)

Only with flash units featuring built-in motor zoom:
mecablitz 32 MZ-3, 40 MZ-..., 44 MZ-2, 50 MZ-5,
54 MZ-..., 70 MZ-...
Flash coverage is automatically adapted to the
focal length of the camera lens.
mecablitz 32 MZ-3, 40 MZ-..., 44 MZ-2, 50 MZ-5,
54 MZ-..., 70 MZ-...:
After the flash unit has been switched on, the
"auto-zoom" function is instantly set if the camera
is on and activated by touching the shutter release.
mecablitz 32 MZ-3:
Adjust the setting slide for the zoom reflector to
position "CZ".
Note:
The motor-zoom head is automatically set and
locked in the 50 mm position when the mecablitz
reflector is moved out of its normal position.
5. AF measuring beam control
The AF measuring beam is activated by the camera
electronics when the ambient lighting conditions
are insufficient for automatic focusing. The AF
beam projects a striped pattern on to the subject,
and the camera uses this pattern to focus
automatically. The AF beam has a range of 9 m
(with a 50 mm f/1.7 standard lens).
Note:
To enable the camera to activate the AF measuring
beam, the lens must be set to AF and the camera
must be in the "Single-AF" or "ONE-SHOT-AF"
19