Getting Started; Helpful Hints; Care & Cleaning - Twin-Star International MANTEL Manual Del Usuario

1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. MAKE SURE YOU DO
NOT DISCARD THE HARDWARE.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer Service:
[email protected], or call 1-866-661-1218. Please identify the parts you need, and model number.
Include your name and address.
• Some steps are more easily handled with two adults.
• Attach the fireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE BACK OF THE
FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a quality Phillips
head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Wood Glue is supplied with your fireplace and its use is included in the step-by-step instructions. Use of the
glue is optional, if you will be moving the fireplace in the future you may wish to leave these steps out. This
allows you to easily disassemble your fireplace. If you are using the glue we suggest a complete "dry" fitting
prior to the application of the glue.
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry
your fireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer. First slide
a flat washer onto the bolt. Your bolt
is now ready for use.
Now it is time to assemble your
Fireplace. All panels are labeled Left
and Right as viewed from the front
of unit.
1. Locate the Center Front Panel (D), Right Front
Panel (C), and Left Front Panel (B) and set out
face down on a scratch free surface.
2. Place a drop of Wood Glue (O) into each of the
pre-drilled holes on the edges of the Center Front
Panel (D). Then insert one Wood Dowel (N) into
each of the pre-drilled holes.
3. Push the Right Front Panel (C) and Left Front
Panel (B) snug to the Center Front Panel (D).
Make sure the Wood Dowels are seated in the pre-
drilled holes. Insert Bolt (L) and Washer (M) into
the pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-2
PLEASE READ AND FOLLOW ALL SAFETY TIPS

GETTING STARTED

HELPFUL HINTS

CARE & CLEANING
CENTER
PANEL
L
N
D
RIGHT
C
FRONT
PANEL
N
M
B
LEFT
FRONT
PANEL