Charging The Speaker; Speaker Phone Operation - QFX BT-275 Manual De Instrucciones

STEREO Pair Mode
Turn on the speaker and press and
when the red and blue lights flash alternatively. After the success of the matching, the blue lights flash
slowly on the host. The pack speakers could be used and auto–distinguish between left and right
channels once the host with the Bluetooth pairing is successful. The rest of the operations, please refer
to the single speaker above.
Ps:
There is no need to reconnect if the two speakers have been connected once. The two speakers will auto-pair after
turning on the speakers.
AUX PLAYBACK OPERATION
1. Turn on the speaker.
2. Insert a 3.5mm audio cable into the aux jack on the back of the speaker while connecting to any audio
device such as mobile phones or computers with the other end of the cable.
3. Play/pause as desired by pressing
PS: The paired function will not exist when plugging in a 3.5mm Aux cable, which means only the one
device linked to the Aux cable can play music. The other devices will not work during the operation!
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx. 3.5 hours of
continuous operation when fully charged.
Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The red indicator
light will go off when the speaker is fully charged.
SPEAKER PHONE OPERATION
• Press to answer an incoming call.
• Press to hang up.
• Keep pressing
• Double press
PS:only the host one can pick /hang up the phone call by pressing its hands-free button,but the vice one can not answer
or hand up the phone call during the operation.
hold
" "
.
to reject an incoming call.
to redial the last phone number.
for 1 second Then the two machines are both auto-paired
.