Midas VeniceU Guía De Arranque Rápido página 14

14 VeniceU
Using USB with a VeniceU console
This is the Quick Start Guide for the VeniceU consoles. It shows you how to get
your console and PC/Mac ready to use USB.
The VeniceU console has been tested and verified for USB use with the following
computer operating systems: a PC running Windows® 7 and a Mac running
OS® X (version 10.7 or later). However, we cannot guarantee correct USB
operation on any other computer operating system.
For full details of console and USB operation, see the VeniceU Operator Manual.
For information on how to use USB with the 'bundled' recording software, refer
to the Software Application Guide (part number DOC04-VNUAPPLICATION).
contents of the VeniceU USB memory stick
The VeniceU USB memory stick, which is supplied with the console,
contains the following:
• Quick Start Guide (this document)
• VeniceU Operator Manual
• Recording Software Application Guide
• Multi-track recording project(s)
• Midas USB installer file (PC only)
• VeniceU console firmware update files (32-bit and 64-bit)
• "Reason" Vx.x.x Software (60-day trial version)
• Demo song(s) for "Reason"
windows 7 operating system
This section shows how to install USB on a PC running the Windows 7
operating system.
to install the USB device driver on your Pc
◊
Do not connect the USB cable to the PC before installing the device driver.
◊
Important: Before installing the USB device driver from the VeniceU
USB memory stick, we recommend that you make sure it is the latest
version by checking the www.midasconsoles.com website. This is
important, as you may not be able to use USB operation properly with
an older version of the device driver.
1. The USB device driver software is on the VeniceU USB memory stick.
Plug the VeniceU USB memory stick into your PC. (Depending on your PC's
configuration, an AutoPlay window may open. If so, select the Open folder
to view files option and then click OK.)
midasconsoles.com
2. On the USB memory stick, double-click the "setup.exe" file in the "Midas_
VeniceU_USB_Drv_Vx_xx_x" folder (where "Vx_xx_x" is the USB driver
version) to start the setup wizard.
3. In the User Account Control dialog box, click Yes.
4. In the "Welcome ..." screen of the Setup dialog box, click Next.
5. In the "Choose Install Location" screen of the Setup dialog box, choose the
destination of the USB driver and click Install.