9.Wire Connecting
Long press volume
Radio
M1-S PRO equipped with wire connection function in order to
connect to devices without bluetooth. As long as the device is
connected by 3.5mm aux out, all can transmit voice signal to M1 -S
PRO.
When device wire connected by 2.5mm to 3.5mm cable to M1-S
PRO , long press volume+ and volume- for 3 seconds to switch on
the connection.
* When wired mode is switched on, it will keep it on until switch off
the M1-S PRO.
, volume+ for 3 seconds.
-
GPS
Speed detector
Music player
12
Wire connecting to
other device which
is not equipped with
bluetooth, any
devices with 3.5mm
connector.