CTEK MXS 5.0 Manual página 7

OPERATING
INSTRUCTIONS
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp
will indicate that the mains cable is connected to the wall
socket. The error lamp will indicate if the battery clamps are
incorrectly connected. The reverse polarity protection will
ensure that the battery or charger will not be damaged.
3. Press the MODE-button to select charging program.
SMALL BATTERY
PROGRAM
Continue to press the MODE-button to combine charging
program with charging options.
AGM
AGM OPTION
Press the MODE-button several times until the desired
combination of charging program and options are lit.
4. Follow the 8-step display through the charging process.
The battery is ready to start the engine when STEP 4 is lit.
The battery is fully charged when STEP 7 is lit.
5. Stop charging at any time by disconnecting the mains cable
from the wall socket.
50013552C MXS 5.0 NA, Manual, Print file 002.indd 7
NORMAL BATTERY
PROGRAM
RECOND
RECOND OPTION
READY TO USE
MODE
BUTTON
ERROR
LAMP
AGM RECOND
POWER
LAMP
SMALL
BATTERY
NORMAL
PROGRAM
BATTERY
PROGRAM
FULLY CHARGED
RECOND
OPTION
AGM
OPTION
EN • 9
2016-11-21 15:01:26
MXS