Safety Warnings - marklin 41 Serie Manual De Instrucciones

Function
• Possible operating systems:
6646/6647 Märklin Transformer, Märklin Delta,
Märklin Digital, Märklin Systems.
• Recognition of the mode of operation: auto-
matic.
• Addresses that can be set (Control Unit):
01 – 80. Address set at the factory: 41.
• Mfx technology for the Mobile Station / Cen-
tral Station.
• Adjustable acceleration.
• Adjustable Braking delay.
• Adjustable maximum speed.
• Setting the locomotive parameters electroni-
cally with the Control Unit, Mobile Station or
Central Station.
• Built-in sound effects circuit, can only be used
in operation with the Control Unit or Märklin
Systems. Additional sound effects that can be
controlled.
• This locomotive can be retrofitted with a smo-
ke generator.
The maintenance work necessary with normal
operation of this locomotive is described below.
Please see your authorized Märklin dealer for
repairs or spare parts.
6

Safety Warnings

• This locomotive is to be used only with an
operating system designed for it (Märklin
6646/6647 AC transformer, Märklin Delta,
Märklin Digital or Märklin Systems).
• This locomotive must never be supplied with
power from more than one transformer.
• Under no circumstances should transformers
rated for an input of 220 volts be connected
to the American 110 volt household current
system.
• Pay close attention to the safety warnings in
the instructions for your operating system.
• The feeder track must be equipped to pre-
vent interference with radio and television
reception, when the locomotive is to be run in
conventional operation. The 74046 interfe-
rence suppression set is to be used for this
purpose. The interference suppression set is
not suitable for digital operation.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Märklin have
been installed in Märklin products or where Märklin products have
been converted in such a way that the non-Märklin parts or the
conversion were causal to the defects and/or damage arising. The
burden of presenting evidence and the burden of proof thereof,
that the installation of non-Märklin parts or the conversion in or of
Märklin products was not causal to the defects and/or damage
arising, is borne by the person and/or company responsible for the
installation and/or conversion, or by the customer.