Main Menu; Auto Channel Scan - Sylvania LD200SL8 Manual Del Usuario

I
NITIAL SETTING

Main Menu

This section describes the overview of the main menu displayed when you
press [SETUP]. For more details, see the reference page for each item.
The main menu consists of the function setting items below.
Press [SETUP] to display the main menu.
• CHANNEL SETUP
You can automatically scan the viewable channels and
remove those that are undesired.
(Refer to "Auto Channel Scan" on page 14.)
• V-CHIP SETUP
You can set the viewing limitations.
(Refer to "V-chip" on page 24.)
• LANGUAGE
You can change the language (English, Spanish,
French) displayed on the main menu.
(Refer to "Language Selection" on page 15.)
• CAPTION
You can change the display format for closed caption,
which displays the dialogue of a TV program or other
information across the TV screen.
(Refer to "Closed Caption" on page 21.)
• BACK LIGHT
You can set the desired brightness mode. (Refer to
"Back Light Setting" on page 23.)
• COLOR TEMP
You can adjust color temperature ("NORMAL", "WARM"
and "COOL") (Refer to "Color Temperature" on page 24.)
• DTVCC
In addition to the basic closed caption described on
page 21, DTV has its own closed caption called DTVCC.
(Refer to "DTV Closed Caption" on page 22.)
14
EN
e.g.) digital TV mode
- TV SETUP -
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [NORMAL]
DTVCC

Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the
unit to a diff erent area after the initial setting, or if you restore the DTV
channel you deleted, you will need to perform auto channel scan.
Before you begin:
Make sure if the unit is connected to antenna or cable.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K/L] to select "CHANNEL SETUP", then
press [ENTER].
or
3
Use [Cursor K/L] to select your desired preset type,
then press [ENTER].
or
• When aerial antenna is connected, select "AUTO
PRESET CH(TV)", "AUTO PRESET CH(DTV)" or "AUTO
PRESET CH(TV/DTV)".
• When connected to CATV, select "AUTO PRESET CH
(CATV)".
• Scanning and memorizing the channels automatically
start.
• When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
• When you selected "AUTO PRESET CH(TV/DTV)", the
lowest memorized analog channel will be displayed
when the scanning and memorizing are completed.
If there is no analog channel, the lowest memorized
digital channel will be displayed.
e.g.) digital TV mode
- TV SETUP -
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [NORMAL]
DTVCC
e.g.) digital TV mode
--- CHANNEL SETUP ---
ADD/DELETE (DTV)
AUTO PRESET CH (DTV)
AUTO PRESET CH (TV/DTV)
AUTO PRESET CH (CATV)
! CATV takes approx. 50min.
e.g.) digital TV mode
D25
AUTO PRESET CH(DTV)