ASROCK P4VM900-SATA2 Manual Del Usuario página 21

press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E. The system will start to format the floppy diskette and copy SATA /
SATAII drivers into the floppy diskette.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the
document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step1, 2, 3, you can start to install Windows
®
the beginning of Windows
prompted, insert the SATA / SATAII driver diskette containing the VIA
After reading the floppy disk, the driver will be presented. Select the driver to install
according to the mode you choose and the OS you install.
1. If you install Windows
convert, delete or rebuild) RAID functions on SATA / SATAII HDDs, please set
the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
2. If you want to use "VIA RAID Tool" in Windows
/ SATAII drivers from the Support CD again so that "VIA RAID Tool" will be
installed to your system as well.
2.12.2 Installing Windows 2.12.2 Installing Windows
2.12.2 Installing Windows 2.12.2 Installing Windows 2.12.2 Installing Windows
If you want to install Windows
functions, please follow below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the
document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Insert the Windows Vista
and follow the instruction to install Windows
see "Where do you want to install Windows?" page, please insert the ASRock
Support CD into your optical drive, and click the "Load Driver" button on the left on the
ASRock P4VM900-SATA2 Motherboard
® 2000 / XP OS on your system.
® 2000 / XP OS on your system. At
setup, press F6 to install a third-party RAID driver. When
®
2000 / XP on IDE HDDs and want to manage (create,
®
Vista Vista With RAID Functions With RAID Functions
Vista Vista Vista With RAID Functions With RAID Functions With RAID Functions
TM TM TM TM TM
®
® TM
Vista on your SATA / SATAII HDDs with RAID
Advanced screen
® TM
Vista OS on your system.
TM
optical disk into the optical drive to boot your system,
® Vista TM OS on your system. When you
®
RAID driver.
environment, please install SATA
IDE Configuration.
2 1 2 1 2 1 2 1 2 1