Philips SJA9191/17 Manual De Utilizador página 22

EN
22
Troubleshooting
Q: It's not announcing call waiting calls
Make sure the volume is set correctly (see
ADJUST VOLUME mode)
• Call the telephone company to make sure
call waiting ID service has been activated and
is working with your line properly.
• Make sure you're talking on the phone
plugged into the back of the Caller ID unit
• Make sure the power cord is correctly
plugged in.
• Make sure the phone line coming from the
wall is going to the LINE jack on the unit and
the phone cord coming from your phone is
going to the PHONE jack on the unit.
• If you have another call waiting ID device, try
unplugging it.
Q: How do I stop the LED from blinking?
Review all new calls by repeatedly pressing the
REV key until all calls in the call log have been
displayed.
Hold the CLEAR key down for 4-seconds to
clear the call log.
Check Voice Mail
If the LED still blinks, unplug the unit from
power for 10-seconds then plug back in.
Q: How do I set the DATE and TIME display?
The time and date will be set automatically with