EN
Dear Customer:
We appreciate the confidence placed in us by purchasing this product.
Our main commitment is to provide excellent articles while maintaining the strictest
quality controls and compliance with all applicable safety regulations, with the aim of
presenting a perfect and safe product for domestic use. Carefully read this manual and
keep it for future reference. If the instrument is delivered to third parties, also delivered
this instruction manual.
HOW TO INSERT THE BATTERIES (Fig. A & B):
You need 4*AA 1.5V batteries. They are not included in the delivery.
Turn the sewing machine upside down. Open the battery compartment (Fig. A) by
sliding the cover. Insert the batteries with correct polarity (+/-) (Fig. B). Close the
battery compartment cover.
You can also connect the machine to the main power by using a 6 Volt DC adaptor
(not included).
HOW TO THREAD (Fig. C to J):
Slide the On/Off switch away from the arm of the sewing machine to deactivate
it (Fig. C).
Turn the handwheel until the arm and the needle are at the top (Fig. D).
Place a bobbin or spool of thread onto the holder in such a way that it rotates
anticlockwise when you pull the tread. Then place the spring onto the holder and
push it (together with the spring) firmly into the associated opening in the device
(Fig. E).
Push the end of the thread through thread guide (from the bottom upwards) (Fig.
F).
Place the thread from above between the two discs of the thread tensions
regulator (Fig. G).
Guide the thread through thread guide (Fig. H).
Place the end of the thread from the back forwards (towards the end of the
device) (Fig. I) through the eye of the needle. If necessary, use the threader to
help you (Fig. J):
o Guide the wire loop of the threader from the front backwards through the
eye of the needle.
o Push the thread through the wire loop.
o Pull the wire loop with the thread out through the eye of the needle.
o The thread is now threaded. Remove it from the wire loop.