Sanus CLASSIC MMF12b Manual De Instrucciones página 10

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate using two lag bolts
19
plate.
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts
movement of the wall plate
3
19
10
and two washers
20
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
19
3 in.
(75 mm)
7/32 in.
(5.5 mm)
. Tighten the lag bolts only until they are pulled firmly against the wall
21
MUST BE firmly tightened to prevent unwanted
20
4
19
19
18