Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GETTING STARTED
Safety First
• Shredders are safe to use as long as you follow
some simple safety guidelines.
• Ensure shredder is plugged into an easily
accessible power outlet and that the cord is not
likely to trip a passer by.
• Ensure the shredder is not positioned against
any walls so that ventilation and cooling are
not restricted.
• Ensure shredder is positioned on a flat surface
• Never attempt to remove the machine top
covers to gain access to the mechanism.
1. Operation
•
Push the rocker switch to I position (A on
diagram) auto position and the LED I (E on
diagram) will light up
•
Feed paper into the entry slot to activate the
auto start sensor
•
The shredder will start and will feed paper
automatically into the shredding mechanism
•
Cutters will stop after the paper has been
shredded
•
Empty the waste basket regularly
•
When not in use return the rocker switch to
0 (B on diagram)
Note: this unit will not operate when door is
open and LED (G on diagram) is illuminated.
2
• Any attempt to repair this unit by unqualified /
unauthorised personnel will invalidate the
warranty.
• Empty the bin at regular times.
• On model fitted with CD / CREDIT card facility
always ensure the flap (I on diagram) is
positioned correctly to ensure any sharp
cuttings are contained within the shredder.
• Do not use cleaning solutions on the surface of
the shredder, clean with a damp cloth and
soap only.
2. CD shredding on
CD models only
•
Push the rocker switch to I position (A on
diagram) auto position and the LED I (E on
diagram) will light up
•
Rotate the CD shredding flap (I on diagram)
positioned over the paper feeding entry so
that the CD / credit card slots cover the
paper entry slot.
•
Press the run forward button (D on diagram)
and hold down
•
Put 1 CD at a time or 1 credit card into the
appropriate slot in flap (I)
•
The CD or credit card will be shredded
•
Release button (D on diagram)
•
After shredding return the flap (I on diagram)
to its original position to expose paper
shredding slot.
•
When not in use return the rocker switch to
0 (B on diagram)
3. Clearing Jams
•
When too many sheets are fed into the
shredding it will jam
•
The LED lights (H on diagram) will indicate
a jam
•
To clear the jam push the rocker switch to
reverse position R (C on diagram)
•
Reverse out the paper and reduce the
quantity of sheets to the recommended
amount.
•
If the sheets remain in the machine press the
forward run switch (D on diagram) to shred
the materials and then reverse on rocker
switch R (C on the diagram) and repeat until
all paper is cleared.
•
In the case of a series Jam please return the
shredder to the authorised service dealer.
•
Warning: do not under any circumstances use
any metal objects to clear the paper entry.
Technical data
– subject to change without notification
Type
CD
Model
shredding
Straight
Cross
cut
cut
P180
•
P180CD
•
•
P185
•
P210
•
P210CD
•
•
P215
•
P270
•
P270CD
•
•
P275
•
P330
•
P330CD
•
•
P335
•
Warranty
•
This product is guaranteed for 24
months from the date of purchase.
Please return the unit to your supplier if
you experience any serious problems.
This does not affect your statutory rights.
Shredding duty
Sheet capacity
cycle in minute
Cut
Bin
size in
size in
On
mm
80gsm
70gsm
litres
time
3.9
16
18
5.8
20
22
35
10
4 x 40
9
11
3.9
16
18
5.8
20
22
40
3.8 x 40
9
11
3.9
18
20
5.8
22
24
50
15
3.8 x 40
11
13
3.9
20
22
5.8
25
27
70
3.8 x 40
12
14
GB
Off
time
20
20
3
Tabla de contenido
