Belt Alignment - Athletic Extreme 1060T Manual De Instrucciones

Belt alignment

Because of variations caused by the physical characteristics of each person (weight, height, way of running and
walking, floor elevation), the canvas can move sideways.
Belt too far to the left
Turn the set screw of left roll to the clockwise direction and the set screw of right roll in anti-
clockwise direction, just 1/4 turn. (Perform this operation with Allen key support).
Obs .: To test, walk on the treadmill for a few minutes. Repeat if necessary, until the belt is
centered.
Belt too far to the right
Turn the set screw of right roll to the clockwise direction and the set screw of left roll in anti-
clockwise direction, just 1/4 turn. (Perform this operation with Allen key support).
Obs .: To test, walk on the treadmill for a few minutes. Repeat if necessary, until the belt is
centered.
Loose belt
Turn the set screw of left roll and right to the clockwise direction 1/4 turn, increasing the
tension of the belt.
Belt very stretched
Turn the left roller set screws and right in the counter-clockwise 1/4 turn, thus decreasing the
tension of the belt.
17