Exhaust Filter - Kenmore 116.33922 Manual Del Propietário

Check motor safety filter frequently and
change when dirty.
I
WARNING
Electrical Shock Hazard
Unplug power cord from electrical
outlet, Do not operate the cleaner
without the motor safety filter, Be
sure the filter is dry and properly
installed to prevent motor failure
and/or electrical shock,
Remove the dust bag as outlined in the
DUST BAG CHANGING section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1. The filter must be
replaced when dirty.
It should be replaced Motor
regularly depending
on use conditions.
The filter CANNOT
be washed as it will
lose its dust trap-
ping ability.
Note: See PARTS AND FEATURES for
motor safety filter number.
Motor
2. If the filter, locat-
ed in the bottom of
the bag cavity, is
dirty, remove it by
pulling forward out
from under the
ribs.
3. Replace the
filter, smooth
side up, by slid-
ing it back into Motor
place under the
fibs in the bag
cavity.
Replace the bag as outlined in the DUST
BAG CHANGING section.
EXHAUST FILTER
HEPA
I
WARNING
Do not operate without exhaust
filter.
The exhaust filter cartridge must be
replaced when dirty. It should be replaced
regularly depending on use conditions. The
filter CANNOT be washed as it will lose
its dust trapping ability.
Note: See PARTS AND FEATURES for the
exhaust filter number.
Slide the
exhaust filter
cover release
down. Pull out
on exhaust filter
cover to remove
from bag cover.
B,u
P
II II/
F__=u=t Plll\ll I
Bag
Exhaust
Remove the
exhaust filter car-
tridge from the bag
cover.
Replace the exhaust
filter cartridge, care- Bag
COVe'---=
fully positioning it so
that it fits into the bag Exhaust
cover. The grey edge FIA_-
of the filter should
be facing away from
the operator. Push
only on filter cartridge
frame, not on filter itseff.
Exhaust F//tor
Cover,
Replace the
exhaust filter
cover and
secure the
latch by push-
ing it upward.
16