Important Safeguards - Dedicated Micros Sprite Lite Guide D’installation

Important Safeguards

Read Instructions
All the safety and operating instructions should be read before the unit is operated.
Power Sources
This unit should be operated only from the type of power source indicated on the
manufacturer's label.
Servicing
Do not attempt to service this unit yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Ventilation
Ensure unit is properly ventilated to protect from overheating.
WARNING
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. The
lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user of this equipment that there are dangerous voltages within the enclosure which may
be of sufficient magnitude to constitute a risk of electric shock.
Regulatory Notes FCC and DOC Information
(USA and Canadian Models Only)
Warning: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
If necessary, the user should consult the dealer or an experienced radio/television technician
for corrective action. The user may find the following booklet prepared by the Federal
Communications Commission helpful: "How to Identify and Resolve Radio-TV Interference
Problems". This booklet is available from the US Government Printing Office, Washington,
DC20402, Stock No. 004-000-00345-4. This reminder is provided to call the CATV system
installer's attention to Art. 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
CE Mark
This product is marked with the CE symbol and indicates compliance with all
applicable directives.
A "Declaration of Conformity" is held at Dedicated Micros Ltd., 11 Oak
Street, Swinton, Manchester M27 4FL.