Tabla de contenido
1. Once all the wall block has been set it is time to install the counter tops. There are 3 pieces in the kit,
make sure you have enough people to help with the panels due to the weight of each piece.
2. Uncrate the granite and set the slabs carefully on top of the grill module wall block base. Use retain-
ing wall adhesive to glue the counter tops down to the base. You need to maintain a consistent overhang
of the base on all polished edges.
3. Using clear exterior silicone sealer install a bead of sealer between:
A. (1) 14" seam between pieces 1 & 2
B. (1) 14" seam between pieces 2 & 3
4. Using the black wedge shims level all the countertop pieces so they are solid and do not rock or teeter.
Keep in mind to maintain a 38 ¼" opening between granite top pieces #1 & #3 so the grill can slide in
easily.
5. Once the glue on the countertops has dried, install clear exterior silicone sealer around the underside
of the granite tops sealing any openings or voids between the bottom of the counters and the top of the
wall stone. With the same silicone, seal all the seams on the countertops to prevent any moisture from
getting in. Wipe off any excess silicone and once it has dried, trim the surface with a razor blade if nec-
essary.
6. You are now ready to install the appliances. Please follow the appliance installation guideline sup-
plied in this manual.
^
d
d
&
Cambridge Pre-Packaged / Pre-Cut
Olde English Wall Grill Module
Grill Module Granite Countertop Installation:
Z/E' &KZ 'Z E/d
^
d
18
2011
Tabla de contenido
