Do not leave the iron unattended white connected or on an ironing board.
Ÿ
Never immerse the iron in water.
Ÿ
Always ptace the iron with its back on a firm at surface when interrupting
Ÿ
ironing and after use.
Keep the sole plate smooth, avoid hard contact with a metal object.
Ÿ
The cord should not be allowed to touch the sole plate when it is hot.
Ÿ
Your iron is designed to rest on the heel.Do not leave the iron unattended when
Ÿ
switched on.
Do not place the iron on an unprotected surface even if it is on its heel rest.
Ÿ
When using the iron for the first time test on an old piece of fabric to ensure the
Ÿ
sole plate is completely clean.
This appliance is not intended for use by persons (including children) with
Ÿ
reduced physical,sensory or mental capabilities,or lack of experience and
knowledge,unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for the safety.
Children should be supervised to ensure that they do not play with the
Ÿ
appliance.
The iron must be used the rested on a stable surface.
Ÿ
When placing the iron on its stand,ensure that the surface on which the stand is
Ÿ
placed stable.
The iron is not to be used if it has been dropped,if there are visible signs of
Ÿ
damage or if it is leaking.
If the supply cord is damaged ,it must be replaced by the manufacturer,its
Ÿ
service agent or similarly qualified in order to avoid a hazard.
2. FILLING WITH WATER
Ensure the iron is disconnected from the power supply.
Turn the steam control knob to position "0" Fill with wter through water filling inlet.
(Do not exceed main level mark on the water tank.)
3. SETTING THE TEMPERATURE
'**Synthetics-Silk
'**wool
'**Cotton-Linen
- Stand the iron upright
- Set temperature control to ironing temperature.
- Inset the mains plug into the main supply.
- After the indicator light has gone out and come on again, you may start ironing.
The indicator light will go out from time to time during ironing.
6