Assembly / Disassembly - Robot Coupe CMP 250 V.V. Manual Del Usuario

Always make sure that the bell is completely immersed
to avoid splashing and that the ventilation openings
in the motor housing do not come into contact with
any liquid!
For optimum efficiency two thirds (
should be immersed in the product.
• WHISK OPERATION
We recommend that you hold the power mixer by
the handle and the bottom of the motor unit.
Y o u c a n a l s o h o l d
the appliance by the
handle with one hand,
leaving the other hand
free to hold the bowl, if
necessary.
While processing we
recommend that you
move the whisk around
in the bowl, in order
t o e n s u r e t h a t t h e
mixture is completely
h o m o g e n e o u s . W e
strongly advise you to
keep the whisk from
touching the sides of
the bowl. For maximum
e f f i c i e n c y , a t l e a s t
one-fifth of the whisk
length should be im-
m e r s e d . W e a l s o
strongly advise you to
start the processing at a
low speed.
- BLADE
• Attaching the tube to the motor unit.
2 / 3
) of the tube
(only for CMP Combi)
- Unplug the machine then, align the flat side of
the conical part of the tube with catch
aluminum casing.
- Insert the narrow portion of conical part
tube into the aluminum casing.
- Turn the tube in the direction of the arrow (see
figure) until it is snugly in place.
• Removing the tube from the casing
- Unplug the power mixer.
- Turn the tube in the opposite direction of that used
to attach it.
- When it will not go any further, remove the tube
from the conical part.

ASSEMBLY / DISASSEMBLY

B
C
TURN TO ATTACH
BELL
• Attaching the bell to the tube
- Unplug the power mixer.
- Align the flat side of
tube with catch on the inside of the bell.
B
- Insert the conical part
washer touching the tube seal
A
the direction of the arrow (See figure) to lock the
in the
bell lug and tube lug
E
of the
A
the conical part of the
C
into the bell. With the
, turn the bell in
D
snugly together.
F
7