Nostalgia RRF300DNC Serie Manual De Instrucciones página 11

INSTALLING THE WATER DISPENSER
1. Line up the tank drainage hole with
the upper door bar of the refrigerator.
3. Attach the tap-adapting
tube to the door with nut (x).
5. Install the tap cover by leveling its hooks at the three square holes in
the door, then fasten the cover on the door with one #2 screw.
7. Fasten the protective
pipe cover to the door
with one #2 screw.
9
2. Insert tap-adapting tube through
the outer door sleeve.
4. Attach two clamps (#6) to
connecting pipe, then connect
tap-adapting tube to door bar
drainage hold and secure clamps.
6. Fill tank with your beverage of
choice and secure the cap on the top.